Hinge Installation Method
2019-04-10 14:00:23作者：肇庆永利金属制品有限公司 浏览数：65
Installation hinge, as shown in the figure, will have a large hole in the cabinet door position before installation of hinge cup. This hole is determined according to the type and size of hinge. It can be put on the top to compare and draw the installation position before punching. Installation of hinge cup is fixed by self-tapping screw of Flat Countersunk Particleboard in common method, and installation of hinge cup is pressed. Type 1, hinge cup with riser, press the entry plate with machine to reserve the opening and fix it.
Install reaming cup without tool type, reaming cup with eccentric plug, manual pressure entry plate reserved opening, pull decorative cover to install and disassemble reaming cup, without tool, install reaming cup press type 2, reaming cup with plug, manual pressure entry plate reserved opening, fixed with screw rotating plug screw.
Hinge installation, in the same way, hinges installation also needs pre-opening, you can first compare the position to mark the hole (note that the hinges are installed vertically, the hinges are fixed by screws, select particleboard screw, European special screw or pre-installed special screw, screw it in with a screwdriver, hinges installation can be done. It is very simple to fix it by pressing the hinge with the lifting plug directly into the machine.
The hinges of cabinet doors are installed without tools. It is suitable for quick-loading hinges. The door panels can be installed and disassembled without any tools. The hinges of cabinet doors can be fixed by screws. The hinges of cabinet doors can be inserted into ordinary hinges, and then fixed by screws.
Connect the hinges with the hinged arm according to the arrow mark in figure 1, and buckle the hinged arm tail downward.
The reamer can be installed by pressing it lightly, and the reamer can be disassembled by pressing it lightly at the position indicated by the arrow.